PET resin

Polyethylene terephthalate (PET) chips for bottles, preforms, thermoformed sheet and polyester fiber. We supply virgin bottle-grade resin and fiber or sheet grades by full container.

Intrinsic viscosity (IV)0.80 ± 0.02 dl/g (bottle grade)
Acetaldehyde≤ 1 ppm
ColorL* ≥ 80 · b* ≤ 1

Request a quote All products

Representative image. Actual material varies by grade and lot.

Grades and forms

Bottle grade (water, CSD, edible oil): IV 0.76 / 0.80 / 0.84 dl/g
Sheet and thermoforming grade (APET): IV 0.80 dl/g
Fiber grade (semi-dull or bright): IV 0.64–0.68 dl/g
For recycled PET in pellet form, see rPET pellets

Applications

Water and soft-drink bottles and preforms
Edible oil and food containers
APET sheet and thermoformed packaging
Polyester staple fiber and filament

Typical specifications

Property	Typical value
Intrinsic viscosity (IV)	0.80 ± 0.02 dl/g (bottle grade)
Acetaldehyde	≤ 1 ppm
Color	L* ≥ 80 · b* ≤ 1
Moisture (as packed)	≤ 0.2 %
Melting point	≈ 248 ± 2 °C
Chip weight	≈ 1.4–1.8 g / 100 chips

Typical values for reference only. Every lot is offered against its own technical data sheet (TDS) and certificate of analysis (COA).

Shipping documents

Commercial invoice and packing list
Bill of lading (B/L)
Certificate of origin
Technical data sheet (TDS) and certificate of analysis (COA)
Safety data sheet (SDS)
Pre-shipment inspection report and loading photos, when agreed

Frequently asked questions

Which IV do I need for water bottles?

Still-water bottles typically use IV around 0.76–0.80 dl/g; carbonated soft drinks usually require 0.84 dl/g. Your preform supplier’s specification prevails.

Can you supply food-contact PET?

Bottle-grade virgin resin is produced for food contact; compliance statements (FDA/EU) depend on the producer and are shared with the offer.